PSE Rebates 2026 (Puget Sound Energy): Heat Pumps $1,500 to $8,000, Insulation to $5,000
Puget Sound Energy pays $1,500 when a PSE Trade Ally or Recommended Energy Professional replaces electric resistance heat, an out-of-warranty ducted heat pump, or a gas furnace (hybrid) with a qualifying heat pump; $2,400 with Efficiency Boost; $4,000 income-qualified to leave PSE natural gas; and $8,000 in two Duvall zip codes. Weatherization pays $1.75 to $2.50 per square foot of attic, wall or floor insulation, capped at $3,500 to $5,000, in homes built 1989 or earlier. A heat pump water heater pays $1,000 ($1,100 with Boost) at the register, through an installer or by online claim. Six PSE pages read in full on October 4, 2026, the water heater page on October 5.
On this page: Rebate table · The rule that decides everything · $1,500 for replacing electric resistance heat, ducted or ductless · Two more $1,500 rebates · Efficiency Boost · $4,000 to leave natural gas, for income-qualified single-family customers · $8,000 in Duvall · Insulation and air sealing · Heat pump water heater · How to apply · Deadlines · FAQ
PSE rebates at a glance
| Measure | Home and current heating | Standard rebate | Income-qualified / note |
|---|---|---|---|
| Electric resistance to air-source heat pump (ducted or ductless) | PSE single-family electric customer; current primary heat is electric resistance (electric furnace, baseboards, wall heaters, radiant cable); no existing heat pump serving the main living area | $1,500 | $2,400 with Efficiency Boost |
| Heat pump to heat pump upgrade (centrally ducted, all-electric, out of warranty) | PSE single-family electric customer; existing ducted all-electric heat pump outside its warranty; new unit AHRI, COP ≥1.75 at 5°F, capacity at 5°F ≥70% of 47°F; ductless and dual-fuel not eligible | $1,500 | $2,400 with Efficiency Boost |
| Natural gas furnace to hybrid heat pump (ducted heat pump + gas furnace) | PSE single-family natural gas or dual-fuel customer (electric-only excluded); current heat is a PSE gas furnace; balance point ≤30°F, furnace locked out above 35°F; ductless not eligible | $1,500 | $2,400 with Efficiency Boost |
| Natural gas heating to air-source heat pump (ducted or ductless), income-qualified | PSE single-family natural gas customer; current primary heat is PSE natural gas (furnace, boiler or gas wall heater); gas equipment removed or cut-and-capped | $4,000 | Income-qualified only; application within 30 days of install |
| Duvall Heat Pump Program: PSE natural gas heating to electric heat pump | Single-family PSE gas or dual-fuel customer at a verified address in specific neighborhoods of zip codes 98014 or 98019; ducted or ductless; gas equipment removed or cut-and-capped | $8,000 | Free heat pump for income-qualified homes through King County Energize (county program); application within 30 days of install |
| Heat pump water heater (Tier 3 or Tier 4 on PSE’s qualified product list) | PSE single-family electric customer; existing home; unit installed on or after January 1, 2026 and running on PSE electricity; one rebate per residence | $1,000 | $1,100 with Efficiency Boost; coupon at a participating Lowe’s or Home Depot (pse.com/coupon), through the installer, or online claim within 30 days of installation; rebate applied after tax and never above the post-tax price (page read in full Oct 5) |
| Attic insulation, 0–4 in. existing to R-49 (site-built, 1989 or earlier) | PSE electric or gas customer heating with PSE energy; single-family (≤4 units) or manufactured home | $1.75 per sq ft, up to $3,500 | Instant discount on the Trade Ally invoice; manufactured homes built 2000 or earlier to R-22/R-30 |
| Attic insulation, 4–6 in. existing to R-49 | Same; site-built homes built 1989 or earlier | $0.50 per sq ft, up to $1,000 | Instant discount on the Trade Ally invoice |
| Wall insulation, empty cavity to R-13 | Same; site-built homes built 1989 or earlier | $2.50 per sq ft, up to $5,000 | Instant discount on the Trade Ally invoice |
| Floor insulation, 0–4 in. existing to R-30 or filled cavity | Same; site-built 1989 or earlier, manufactured 2000 or earlier (to R-22) | $2.50 per sq ft, up to $5,000 | Instant discount on the Trade Ally invoice |
| Air sealing (attic and/or floor); duct sealing + insulation; duct sealing only; advanced duct sealing | Same; air sealing and duct insulation for homes built 1989 or earlier, duct sealing only to 2000; advanced duct sealing by an Aeroseal-certified Trade Ally | $0.20 per sq ft (to $400 each); up to $1,000; up to $550; up to $1,250 | Instant discount on the Trade Ally invoice |
Official page: Puget Sound Energy — Residential rebates (heating; weatherization) · Application: No customer form: the PSE Trade Ally or REP contractor applies and deducts the rebate; Efficiency Boost income is attested to the installer on site · 1-800-562-1482 (Energy Advisors, Mon–Fri 8 a.m.–5 p.m.)
The rule that decides everything: a PSE Trade Ally or REP must install it
Every PSE residential rebate page opens with the same sentence: you must use a contractor who is a PSE Recommended Energy Professional (REP) or PSE Trade Ally, and you may not use an out-of-network contractor or complete the work yourself. The rebate is “only available through the contractor working on your project” — there is no customer application for the heat pump or weatherization rebates, and PSE warns that Trade Allies are independent contractors who cannot bind PSE. In practice the contractor confirms your eligibility, installs equipment that meets the national efficiency standard and is AHRI certified, deducts the rebate from the invoice and files the paperwork. Before you sign, call a PSE Energy Advisor at 1-800-562-1482 to confirm the company is in the network today; a contractor who was a Trade Ally last year may not be one now. Washington guides that describe a PSE rebate you can claim yourself after the fact describe a program that PSE’s pages do not offer.
$1,500 for replacing electric resistance heat, ducted or ductless
The core rebate is for homes that heat with electricity the expensive way: electric forced-air furnaces, baseboards, wall heaters or radiant cable, ceiling or floor heat, supplied by PSE. Replace that with a qualifying air-source heat pump and PSE pays $1,500, whether the new system is centrally ducted or a ductless mini-split. Three paths have their own rules. Zonal electric to ductless: the new system must be an AHRI-certified variable-speed mini- or multi-split with inverter technology, at least three-quarters of a ton in heating mode, with one indoor head in the main living area; bedroom-only and any ducted-air installations do not qualify. Electric furnace to ductless: the same equipment rules. Electric furnace to ducted: an AHRI-certified, centrally ducted, all-electric heat pump with electric-only auxiliary heat, compressor lockout disabled, and resistance backup locked out above a recommended 35°F. Homes with an existing heat pump serving the main living area are not eligible, and furnaces, boilers or wall heaters burning gas, propane or oil do not qualify here.
Two more $1,500 rebates: replacing an old heat pump, or pairing one with a gas furnace
The heat pump upgrade rebate pays $1,500 ($2,400 with Efficiency Boost) to replace an existing centrally ducted, all-electric heat pump that is outside its manufacturer’s warranty. The new unit must be AHRI-certified, ducted and all-electric, and meet two cold-climate thresholds PSE publishes: a coefficient of performance of at least 1.75 at 5°F, and rated capacity at 5°F of at least 70 percent of capacity at 47°F. Ductless and dual-fuel systems are not eligible, compressor lockout must be disabled, and the installer must recover the old refrigerant. The hybrid heat pump rebate pays the same $1,500 ($2,400 Boost) to pair a central ducted heat pump with a new or existing PSE natural gas furnace, for gas or dual-fuel customers whose current heat is a gas furnace; electric-only customers, boilers and existing heat pumps are excluded. PSE requires a balance point of 30°F or lower and a furnace lockout at 35°F or lower, and warns that bills depend on the gap between gas and electric rates.
Efficiency Boost: $2,400 instead of $1,500, attested to the installer
PSE’s Efficiency Boost raises the heat pump conversion, upgrade and hybrid rebates from $1,500 to $2,400 for households that meet PSE’s income guidelines, published as an income qualification table on pse.com. All the standard requirements still apply; the difference is procedural. If you qualify, the Trade Ally or REP completing the project has you attest to your income eligibility on site, and the higher amount is applied to the same job. PSE also says customers in manufactured or mobile homes may qualify for a higher rebate through the same Efficiency Boost program. The table is organized by household size and county, so a household that misses the threshold in one county could qualify in another; check it before quotes, because the $900 difference is decided before installation, not after. We cite the table as PSE publishes it and have not reproduced its figures here; they change with federal income limits.
$4,000 to leave natural gas, for income-qualified single-family customers
The Moderate-Income Fuel-Switching Heat Pump Program is PSE’s largest territory-wide heat pump rebate: $4,000 for an income-qualified single-family customer whose primary heating runs on PSE natural gas — a gas furnace, boiler or gas wall heater — and who replaces it with an AHRI-certified ducted or ductless heat pump. The gas equipment must be removed or decommissioned (cut and cap is allowed), the compressor lockout disabled or set at or below the balance point, backup resistance heat locked out at about 5°F above the balance point, and the resident given thermostat guidance. Homes with electric resistance or hybrid systems are not eligible, nor are homes or ADUs that already have a heat pump. PSE’s page has an eligibility checker that takes household size, gross monthly income and county. Two deadlines sit inside the rules: installation by a Trade Ally or REP, and the rebate application within 30 days of install. One rebate per residence, and it cannot exceed the pre-tax price of the equipment.
$8,000 in Duvall: two zip codes, a verified address, and a 30-day application
PSE’s Duvall Heat Pump Program pays $8,000, not income-tested, to replace PSE natural gas heating with an electric heat pump, but only in specific neighborhoods inside zip codes 98014 and 98019; PSE verifies the address. The customer must be a single-family PSE gas or dual-fuel customer whose primary heat is a gas furnace, boiler or wall heater; homes with an existing heat pump and buildings of five or more units are out. Ducted and ductless systems qualify if AHRI-certified; a ductless system needs an inverter mini- or multi-split of at least ¾ ton with a head in the main living area and each bedroom. The gas equipment must be removed or cut and capped, backup heat locked out near the balance point, and the application filed within 30 days of install by the Trade Ally or REP, who caps the rebate at the pre-tax price. Income-qualified Duvall households can get a free heat pump through King County’s Energize program, linked from PSE’s page.
Insulation and air sealing: $1.75 to $2.50 per square foot, instant, homes built 1989 or earlier
PSE’s weatherization rebates are per square foot, taken off the Trade Ally’s invoice at the point of sale; PSE does not pay them to the customer. Attic insulation pays $1.75 per square foot (up to $3,500) when the existing layer is 0 to 4 inches and the contractor brings it to R-49, or $0.50 per square foot (up to $1,000) from 4 to 6 inches; removing insulation to qualify is not allowed. Wall insulation pays $2.50 per square foot (up to $5,000) for empty cavities insulated to R-13, floor insulation the same rate and cap from 0 to 4 inches to R-30. Air sealing pays $0.20 per square foot (up to $400 each at attic and floor); duct sealing with insulation up to $1,000, duct sealing alone up to $550, Aeroseal advanced sealing up to $1,250. Site-built homes must be built 1989 or earlier; manufactured homes to 2000 have their own R-value targets. You must heat primarily with PSE energy; income-qualified households may instead get PSE’s no-cost Home Weatherization Assistance.
Heat pump water heater: $1,000, $1,100 with Boost — and three numbers in PSE’s own materials
PSE’s heat pump water heater page, read in full on October 5, 2026, pays $1,000 on a Tier 3 or Tier 4 unit from its qualified product list (updated May 19, 2026) and $1,100 through Efficiency Boost. It needs no Trade Ally: request a coupon at pse.com/coupon for the register of a participating Lowe’s or Home Depot, have an installer apply it, or buy anywhere and claim online with the paid invoice and model number. In every channel: apply within 30 days of installation, one rebate per single-family home, equipment installed in 2026 or later on PSE electricity, the rebate taken after tax and never above the post-tax price; new construction, multifamily of five or more units and commercial accounts are excluded. The page’s meta description still says $500 and the rebate form dated February 18, 2026 prints $750 and $850; we publish the page body; if a store or form offers less, ask PSE at 1-800-562-1482. See our heat pump water heater guide for Con Edison, BGE and NorthWestern.
How to apply, step by step
- Identify your current primary heating fuel and type: electric resistance, an old ducted heat pump, a PSE gas furnace, or PSE gas in Duvall decide which rebate, if any, applies.
- Find a PSE Trade Ally or REP through pse.com/en/rebates/find-a-contractor, or call 1-800-562-1482 to confirm a contractor you already have is in the network.
- For Efficiency Boost or the $4,000 gas program, check PSE’s income table or eligibility checker before you get quotes; you attest to income with the installer.
- Ask for the rebate on the quote with the AHRI certificate number, the lockout settings and, for ductless, the indoor head in the main living area.
- For the gas-to-heat-pump and Duvall rebates, make sure the contractor files within 30 days of installation and that the gas equipment is removed or cut and capped.
- For insulation, have the contractor measure the existing depth and square footage first: the per-square-foot rate and the cap depend on them, and the home must be built 1989 or earlier.
Deadlines for PSE
- No program year published — PSE heat pump rebates: no program year published; the $4,000 gas-to-heat-pump rebate must be applied for within 30 days of installation
Sources and method
Each source below carries the date it was read in full, the latest on October 5, 2026; the amounts on this page are the utility’s own unless marked reported, in which case they come from the utility’s participating contractors and are flagged for confirmation. The official page is re-read automatically every day; a change reaches this page, the Washington page, the deadlines and the news feed together, after it is read again by hand. Data for this page are in utilities.json (CC BY 4.0).
- Puget Sound Energy — Electric resistance to air-source heat pump conversion rebate ($1,500 / $2,400 Boost, requirements; read in full Oct 4)
- Puget Sound Energy — Moderate-Income Fuel-Switching Heat Pump Program ($4,000, 30-day application; read in full Oct 4)
- Puget Sound Energy — Heat pump upgrade rebate ($1,500 / $2,400; cold-climate thresholds; read in full Oct 4)
- Puget Sound Energy — Hybrid heat pump rebate ($1,500 / $2,400; gas or dual-fuel customers; read in full Oct 4)
- Puget Sound Energy — Duvall Heat Pump Program ($8,000; zip codes 98014 / 98019; read in full Oct 4)
- Puget Sound Energy — Weatherization rebates (insulation, air and duct sealing; read in full Oct 4)
- Puget Sound Energy — Heat pump water heater rebate ($1,000 / $1,100 Boost; coupon, installer or online claim; 30 days; read in full Oct 5)
- Puget Sound Energy — Residential electric water heat rebate form 8083 (prints $750 / $850; dated Feb 18, 2026; not the page amount)
- Puget Sound Energy — Efficiency Boost
- King County — Energize program, Duvall (no-cost heat pumps for income-qualified homes; linked from PSE’s Duvall page)
Frequently asked questions
- How much is the PSE heat pump rebate in 2026?
- $1,500 for replacing electric resistance heating, an out-of-warranty ducted heat pump, or a gas furnace (hybrid) with a qualifying heat pump; $2,400 with Efficiency Boost; $4,000 income-qualified for leaving PSE natural gas; $8,000 in the Duvall program area. All read on PSE’s pages on October 4, 2026, and all require a PSE Trade Ally or REP installer.
- Can I get the PSE rebate if I install the heat pump myself or use my own contractor?
- No. PSE’s pages say you may not use an out-of-network contractor or complete the work yourself; the rebate is available only through a PSE Trade Ally or Recommended Energy Professional, who applies it and files the paperwork.
- I heat with gas. Does PSE pay for a heat pump?
- Three ways: $4,000 through the income-qualified Moderate-Income Fuel-Switching program if your primary heat is PSE natural gas; $1,500 (or $2,400 Boost) for a hybrid system that keeps the gas furnace as backup; and $8,000 if you live in the Duvall program neighborhoods in zip codes 98014 or 98019. The standard $1,500 conversion rebate is for electric resistance heating only.
- Does PSE pay for a ductless mini-split?
- Yes, under the $1,500 / $2,400 conversion rebate, the $4,000 gas program and the $8,000 Duvall program, if the system is an AHRI-certified variable-speed inverter mini- or multi-split of at least ¾ ton with one indoor head in the main living area. The heat pump upgrade and hybrid rebates are ducted-only.
- How much does PSE pay for insulation?
- $1.75 per square foot of attic insulation (up to $3,500) from 0–4 inches to R-49, $0.50 (up to $1,000) from 4–6 inches, $2.50 per square foot for wall insulation to R-13 or floor insulation to R-30 (up to $5,000 each), plus $0.20 per square foot for air sealing. Site-built homes must be built 1989 or earlier, the work done by a PSE Trade Ally, and the rebate comes off the invoice.
- What is PSE Efficiency Boost?
- PSE’s income-qualified tier: the heat pump conversion, upgrade and hybrid rebates rise from $1,500 to $2,400 when your household meets PSE’s published income guidelines; you attest to eligibility with the installer on site. Manufactured-home customers may also qualify for a higher amount.
- Is there a deadline for PSE rebates?
- PSE publishes no program year. The $4,000 gas program and the $8,000 Duvall program require the application within 30 days of installation; the other heat pump and weatherization rebates are applied by the contractor as part of the job. PSE calls weatherization a tariffed service that can change without notice. We re-read PSE’s pages daily and will post any date PSE publishes.
- How much is the PSE heat pump water heater rebate?
- $1,000 on a Tier 3 or Tier 4 unit from PSE’s qualified product list, $1,100 with Efficiency Boost, as a coupon at a participating Lowe’s or Home Depot, through your installer, or by online claim within 30 days of installation; one per home, unit installed in 2026 or later. PSE’s rebate form still prints $750/$850 and its meta description $500 — the page body, read October 5, 2026, says $1,000.
Related
The full picture for the state — every program, the federal status and the corrections log — is on Washington heat pump rebates. All utilities we cover: utility rebate pages.